Royal Beige 16″x24″ Leathered Marble Paver – Timeless Outdoor Sophistication
The Royal Beige 16″x24″ Leathered Marble Paver showcases warm beige hues with a subtle leathered texture, offering both beauty and practicality. Its naturally varied surface enhances slip resistance, making it ideal for patios, pool decks, and walkways. The 16″x24″ size minimizes grout lines, allowing for faster and cleaner installation.
Crafted from high-quality marble, this paver is built to endure outdoor conditions while maintaining its elegant appearance. The leathered finish reduces glare and provides a soft, tactile feel underfoot, combining safety with refined style.
Material: Premium natural marble
Color: Warm beige with gentle tonal variation
Finish: Leathered for texture and slip resistance
Size: 16″x24″ (nominal)
Edge: Straight, leathered edge
Applications: Patios, pool areas, courtyards, and walkways
Pair these pavers with lush greenery or contemporary outdoor accents for a personalized design. The Royal Beige Leathered Marble Paver seamlessly blends durability and sophistication, transforming any outdoor space into a stylish retreat.
Installation Guide – Royal Beige 16″x24″ Leathered Marble Paver
Important Note
This guide focuses solely on the paver installation phase. Proper base and bedding preparation must be completed by experienced professionals before beginning.
Step 1: Dry Layout & Pattern Planning
Lay out pavers on the prepared surface to evaluate natural color and veining.
Arrange in running bond, ashlar, or modular patterns to reduce visible joints and balance tones.
Use chalk lines or a laser level to create reference lines for precise alignment.
Step 2: Paver Placement
Carefully position each 16″x24″ paver onto the bedding layer.
Maintain uniform joint spacing of 1/8″–1/4″.
Gently tap with a rubber mallet to ensure each paver is fully seated and level.
Step 3: Cutting & Edge Finishing
Use a wet saw with a diamond blade suitable for marble for precise cuts.
Support large-format pavers during cutting to prevent chipping.
Smooth cut edges with a fine rubbing block to maintain the leathered texture.
Step 4: Joint Treatment
Fill joints with polymeric sand or a marble-compatible filler.
Compact gently and sweep away excess material.
If using polymeric sand, lightly mist to activate the binding agents following the manufacturer’s instructions.
Step 5: Sealing & Maintenance
Once dry, apply a penetrating, breathable sealer designed for exterior marble.
Re-seal every 1–2 years, depending on exposure and foot traffic.
Clean only with pH-neutral, non-abrasive cleaners; avoid acidic products.
Disclaimer
Natural marble displays inherent variations in color and texture. These are not defects. Always perform a dry layout and inspect materials prior to final installation. Professional installation is strongly recommended to ensure optimal performance and longevity.
