Royal Beige 6″x12″ Leathered Marble Paver – Elegant Outdoor Detailing
Add understated luxury to your outdoor spaces with the Royal Beige 6″x12″ Leathered Marble Paver. Its warm beige hues and soft leathered surface create a naturally slip-resistant texture, perfect for patios, walkways, and pool edges where style meets safety.
The compact 6″x12″ format allows for creative patterns such as herringbone, stacked, or basketweave layouts. Leathered edges reduce glare and add a subtle tactile quality underfoot, enhancing both the visual depth and the sensory experience of your design.
Made from premium natural marble, these pavers are built to endure the elements and heavy foot traffic. Their smaller size makes installation flexible and efficient, ideal for intimate residential gardens as well as larger commercial courtyards.
Key Features
Material: Premium natural marble
Color: Warm beige with soft veining
Finish: Leathered for texture, grip, and subtle sheen
Size: 6″x12″ nominal
Edge: Leathered straight edge for refined detailing
Applications: Patios, walkways, pool surrounds, accent areas
Elevate any outdoor environment with the Royal Beige 6″x12″ Leathered Marble Paver, combining classic elegance with practical durability.
Installation Guide – Royal Beige 6″x12″ Leathered Marble Paver
Important Notice
This guide covers only the surface installation of pavers. Sub-base and bedding preparation must be completed by qualified professionals before beginning.
Step 1: Dry Layout & Pattern Planning
Lay out the 6″x12″ pavers on the prepared bedding layer to check color variations and leathered texture.
Select a pattern such as running bond, herringbone, or basketweave to reduce visible joints and create visual interest.
Mark straight reference lines using chalk or a laser level to ensure precise alignment during installation.
Step 2: Paver Placement
Carefully position each paver onto the bedding surface according to your layout lines.
Maintain uniform joint spacing of 1/8″–1/4″; use spacers if needed.
Tap lightly with a rubber mallet to achieve full bedding contact and a level surface.
Regularly check with a level to prevent lippage, particularly with the small-format pavers.
Step 3: Cutting & Edge Finishing
Use a wet saw with a diamond blade rated for marble to make clean, precise cuts.
Support the pavers securely while cutting to avoid chipping or breakage.
Smooth exposed edges with a fine rubbing block to preserve the leathered finish.
Step 4: Joint Filling
Fill joints with polymeric sand or a marble-compatible joint filler.
Compact gently and sweep away any excess material.
If using polymeric sand, lightly mist to activate bonding agents according to manufacturer instructions.
Step 5: Sealing & Maintenance
Once fully dry, apply a breathable, penetrating sealer formulated for exterior marble.
Re-seal every 1–2 years, depending on exposure and foot traffic.
Clean only with pH-neutral, non-abrasive stone cleaners; avoid acidic products that can damage the marble.
Disclaimer
Natural marble exhibits inherent tonal and textural variations. These characteristics are part of the stone’s unique beauty and are not defects. Always dry-lay and inspect materials before final installation. Professional installation is strongly recommended for optimal longevity and appearance.
