Dolomite Tile 12″x24″ Honed – White Marble with Beveled Edge
Elegant Simplicity with a Soft Matte Finish
The Dolomite 12″x24″ Honed Tile brings refined natural beauty to any interior. Crafted from premium white dolomite marble, it features delicate veining and a smooth honed surface that reduces glare while enhancing the stone’s texture. Subtle beveled edges provide a polished architectural detail, making it an ideal choice for bathroom walls, kitchen backsplashes, or upscale commercial interiors.
Its neutral white tone and versatile 12″x24″ size allow it to harmonize seamlessly with both contemporary and classic designs. The honed finish softens the stone’s appearance, creating a calm, serene ambiance perfect for spa-inspired or minimalist spaces. Additionally, the larger format minimizes grout lines, giving surfaces a more seamless, expansive look.
Key Features – 12″x24″ Dolomite Honed Tile
Material: Natural White Dolomite Marble
Finish: Honed – matte, non-reflective surface
Edge: Beveled for subtle depth and elegance
Size: 12″x24″ (30.5 x 61 cm)
Thickness: 0.4″ (1 cm)
Recommended Use: Interior walls – ideal for bathrooms, kitchens, backsplashes, and feature areas
Why Choose This Tile?
This honed Dolomite tile delivers a sophisticated, understated elegance without the glare of polished surfaces. Its crisp white hue complements almost any color palette, while beveled edges add a refined detail to your installation. Durable, low-maintenance, and versatile, it’s perfect for projects where both style and practicality are essential.
Installation Guide – Step by Step
Step 1: Surface Preparation – Flat, Clean, and Stable
Make sure the substrate is dry, level, and free of dust, oils, or loose debris.
Verify flatness with a long level; uneven surfaces can cause lippage with large-format honed Dolomite tiles.
Apply a waterproofing membrane in wet areas such as bathrooms or kitchens.
If needed, use a self-leveling compound to correct dips or high spots for a perfectly even base.
Step 2: Layout Planning – Symmetry and Flow
Snap centerlines to guide a balanced, visually pleasing tile layout.
Dry-lay several tiles to check veining and color variations; blend tiles from multiple boxes for uniformity.
Maintain 1/16″–1/8″ grout joints to highlight honed edges while keeping the finish refined.
Adjust placement to avoid small sliver cuts along edges or corners.
Step 3: Adhesive Application – White Thin-Set
Recommended Mortars:
Instructions:
Apply thin-set with a 1/2″ square-notched trowel for even coverage and full tile support.
Back-butter each tile to ensure complete bonding and eliminate voids.
Work in small sections to prevent mortar from drying before tile placement.
Step 4: Cutting & Fitting – Precise and Smooth
Use a wet saw with a continuous-rim diamond blade to achieve clean, chip-free cuts.
Double-check measurements and dry-fit tiles before final placement.
Smooth exposed cut edges with a marble file or polishing pad for a seamless finish.
Step 5: Setting Tiles – Level and Aligned
Use a leveling system to ensure flush surfaces and prevent lippage.
Align tiles using spacers and gently tap with a rubber mallet for accurate placement.
Immediately clean any excess thin-set from the honed surface to avoid staining.
Allow mortar to cure for at least 24 hours before grouting.
Step 6: Grouting & Sealing – Protect and Preserve
Choose non-sanded or fine-grain grout suitable for your joint width; test on a sample area first.
Apply grout diagonally with a rubber float, ensuring joints are fully filled.
Wipe excess grout promptly and buff the surface after 15–20 minutes.
Once grout cures (typically 72 hours), apply a penetrating sealer designed for honed white marble to protect against moisture and staining.
Maintenance Tips – Keep Surfaces Looking Fresh
Clean with pH-neutral stone cleaners; avoid acidic or abrasive products.
Wipe spills immediately, especially oils, wine, or colored liquids.
Re-seal every 6–12 months based on foot traffic and usage.
Use protective pads under furniture and rugs in high-traffic areas to prevent surface wear.
Shipping & Packaging
Each 12″x24″ Dolomite Honed Marble Tile is individually cushioned and securely boxed. Store indoors in a dry environment and inspect all tiles before installation for tone and quality.
Important Note
Dolomite is a natural stone with inherent variations in color and veining. These characteristics are not defects but part of the material’s unique beauty. Always dry-lay and plan your installation layout in advance. Stonemarket USA is not responsible for issues caused by improper handling or site conditions.
