Crafted from high-quality travertine, the Ivory 6″x12″ Tumbled Travertine Paver features a warm beige hue with gentle veining and natural surface variation. Its tumbled finish creates a rustic, weathered look that adds enduring charm to outdoor spaces. Rounded edges and a slip-resistant texture make it perfect for patios, walkways, pool decks, and garden paths.
Designed for durability and heat resistance, this paver stays comfortable underfoot even in direct sunlight. Its natural porosity allows for efficient water drainage, minimizing pooling in wet conditions. The versatile 6″x12″ size works beautifully in running bond, herringbone, or random layouts, complementing both traditional and contemporary outdoor designs.
Key Features:
Material: Premium travertine
Finish: Tumbled for natural, rustic appeal
Color: Ivory beige with subtle tonal variation
Size: 6″x12″
Slip-resistant surface for safety
Ideal for patios, walkways, pool surrounds, and driveways
Weatherproof and suitable for all climates
Bring timeless elegance and lasting performance to your exterior spaces with the Ivory 6×12 Tumbled Travertine Paver, a natural stone solution built to enhance both style and functionality.
Installation Guide – Ivory 6″x12″ Tumbled Travertine Paver
Important Notes
This natural travertine paver with a tumbled finish is designed for outdoor horizontal use.
Recommended for dry-set installations over a compacted base or wet-set with mortar.
No grout is required for dry-set, but joint filler (sand or polymeric sand) may be used if desired.
Step 1: Base Preparation (Dry-Set Method)
Excavate the area to a depth of approximately 6–8 inches.
Lay 4–6 inches of compacted crushed gravel or road base. Compact thoroughly.
Add 1–2 inches of bedding sand and screed for a level surface.
Step 2: Layout
Dry-lay the pavers in your desired pattern (running bond, herringbone, basketweave, etc.).
Maintain consistent spacing (typically 1/8″–1/4″).
Step 3: Cutting
Step 4: Edge Restraints (Optional)
Step 5: Joint Filling
Brush polymeric sand or regular joint sand into the joints.
Compact the pavers and sweep sand into the joints again if needed.
Mist the surface with water to activate polymeric sand (if used).
Wet-Set Installation (Alternative)
Apply a concrete or mortar bed over an existing slab or base.
Use a 1/2″ notched trowel to spread thinset or medium-bed mortar.
Back-butter each paver to ensure proper bonding.
Sealing & Maintenance
Apply a penetrating sealer suitable for travertine to protect against stains and moisture.
Reapply sealer every 1–2 years depending on exposure and usage.
Clean with a pH-neutral outdoor stone cleaner. Avoid acidic or abrasive products.
Disclaimer
Travertine is a natural stone and may feature surface pits, color variations, and textural differences. These are not defects but characteristics of the material. Always follow ICPI guidelines for paver installation and consult local building codes and climate considerations.
