Avalon White 6″x12″ Leathered Marble Paver – Elegant and Durable
The Avalon White 6″x12″ Leathered Marble Paver combines natural beauty, texture, and long-lasting performance. Made from premium white marble, its leathered surface adds grip while showcasing the stone’s inherent charm.
Sized at 6″x12″, this paver is perfect for outdoor areas such as patios, walkways, garden paths, and pool decks. Its versatile format allows creative layouts like herringbone or stacked patterns. The soft white color brightens spaces, while the leathered finish offers a contemporary yet natural appearance.
Features:
Material: Natural marble
Color: Avalon White
Finish: Leathered / textured for slip resistance
Size: 6″x12″
Ideal for outdoor patios, walkways, pool decks, and garden paths
Easy to maintain and durable
Upgrade your exterior spaces with this sophisticated marble paver, combining timeless elegance with practical performance.
Installation Guide – Avalon White 6″x12″ Leathered Marble Paver
Material Overview
The Avalon White 6″x12″ Marble Paver features a leathered (brushed) finish, providing a subtle texture and slip-resistant surface. Designed for outdoor horizontal applications such as patios, walkways, and terraces. Not recommended for high-load driveways unless additional reinforcement is applied.
Step 1: Base Preparation (Dry-Set Method)
Excavate the area to a depth of 6″–8″, considering local soil and climate conditions.
Spread 4″–6″ of compacted crushed stone or gravel (minimum 95% compaction) as the base layer.
Add 1″ of bedding sand or screenings, screeding it to create a level surface.
Step 2: Laying the Pavers
Arrange pavers in the desired pattern, such as running bond or herringbone.
Maintain consistent joint spacing of 1/8″–1/4″.
Tap each paver gently with a rubber mallet to secure it in the bedding layer.
Use a level regularly to ensure a flat, even surface.
Step 3: Cutting and Adjustments
Step 4: Joint Filling
Sweep polymeric sand or fine joint sand into the paver gaps.
Compact the surface using a plate compactor with a rubber pad to avoid damaging edges.
If using polymeric sand, lightly mist with water to activate the binding agents.
Sealing & Maintenance
Apply a penetrating sealer formulated for marble and outdoor use to protect against stains and extend lifespan.
Re-seal every 1–2 years, depending on foot traffic and weather conditions.
Clean with a pH-neutral stone cleaner; avoid acidic or abrasive cleaners that can etch the marble.
Disclaimer
Marble is a natural stone with veining, color variation, and subtle surface movement—these are inherent features that add character. Proper sub-base preparation and drainage planning are essential for optimal outdoor performance. Always perform a dry layout and test a small area before completing the full installation.
