Eterna Bianco 6″x24″ 3D Ledgestone Panel – Chemically Adhesed Grey Marble
Elevate your walls with the Eterna Bianco 6″x24″ 3D Ledgestone Panel, crafted from premium grey marble to bring depth, texture, and timeless sophistication to any vertical surface. Its three-dimensional design captures light and shadow, creating a visually striking feature that enhances both modern and classic interiors.
Engineered for chemical adhesion without mesh backing, each panel ensures a clean, secure installation with long-lasting durability. Designed exclusively for vertical applications, it’s perfect for accent walls, fireplaces, exterior facades, or high-end commercial spaces. The honed finish adds a soft matte texture, highlighting the natural elegance of the stone while maintaining a refined architectural look.
Key Features
Material: Premium grey marble
Finish: Sandblasted, 3D texture
Panel Size: 6″x24″
Installation: Chemically adhesed (no mesh backing)
Application: Vertical wall use only (interior & exterior)
Recommended Uses
Feature walls and accent walls
Fireplace surrounds
Exterior facades and outdoor kitchens
Commercial lobbies and reception areas
Kitchen backsplashes
The Eterna Bianco 3D Ledgestone Panel combines natural beauty, structural reliability, and architectural elegance, transforming ordinary walls into stunning, tactile design features.
Installation Guide – Eterna Bianco 6″x24″ 3D Ledgestone Panel (Vertical Wall Use Only)
Step 1: Surface Preparation
Ensure the wall is clean, level, dry, and structurally sound.
Suitable substrates: cement board, masonry block, or concrete.
Apply a waterproof membrane or moisture barrier in wet areas.
Do not install directly onto drywall; use metal lath and a scratch coat if necessary.
Step 2: Layout & Orientation
Designed for vertical wall installation only.
Dry-lay multiple panels beforehand to assess shading, texture, and pattern continuity.
Stagger panel joints for a natural, cohesive appearance.
Mark horizontal reference lines with a level to maintain straight alignment.
Step 3: Adhesive Application
Recommended Mortars:
Instructions:
Apply mortar using a 1/2″ square-notched trowel to the substrate.
Back-butter each panel to ensure full coverage and maximum adhesion.
Start at the bottom and work upward, pressing panels firmly into place with a slight sliding motion.
Use a level frequently to maintain accuracy.
Step 4: Cutting & Fitting
Cut panels with a wet saw and continuous-rim diamond blade for precise edges.
Miter corners or use dedicated corner pieces as needed.
Always wear protective gloves and eyewear during cutting.
Step 5: Finishing
This is a dry-stack system; grout is not required.
Remove any excess mortar immediately with a damp sponge or cloth.
Allow panels to cure undisturbed for 24–48 hours before exposure to moisture or weight.
Step 6: Sealing (Optional but Recommended)
Apply a penetrating, breathable sealer suitable for natural stone to protect the surface.
Reapply every 1–2 years depending on environmental exposure.
Maintenance Tips
Clean with a pH-neutral stone cleaner and a soft brush or microfiber cloth.
Avoid acidic or abrasive cleaners that could damage the stone.
Regular sealing maintains water and stain resistance.
Important Disclaimer
The Eterna Bianco 6″x24″ 3D Ledgestone Panel is intended for vertical wall applications only. It is not suitable for flooring or load-bearing surfaces. Natural color and texture variations are inherent and should be expected. Always dry-lay and inspect panels before installation. Stonemarket USA is not responsible for improper installation, substrate preparation, or misuse. Professional installation is highly recommended.
