Dolomite Strip Linear Polished Mosaic Tile brings a clean, modern look to any space. Made from premium Dolomite marble, this tile features a crisp white base enhanced by subtle gray veining. Its polished finish creates a sleek surface that reflects light beautifully, adding brightness and sophistication.

Cropped front view of a single Dolomite strip linear sheet highlighting the repeating stacked pattern.

Three-quarter perspective of the mosaic sheet, showing tile layout and piece thickness across the surface.

Close-up at an angle showing the polished white dolomite strips with subtle veining and tight grout joints.

Extreme edge close-up of the polished dolomite strips, emphasizing tile thickness and smooth faces.

Dolomite White Strip Linear Polished Marble Mosaic Tile – Elegant Modern Lines

The Dolomite Strip Linear Polished Marble Mosaic Tile brings sleek, contemporary elegance to any interior. Crafted from premium Dolomite marble, it features a bright white base accented with subtle gray veining, creating a refined and sophisticated look. The polished finish reflects light, enhancing the natural beauty of the stone, while the linear strip layout adds clean lines and visual movement to walls, backsplashes, and accent surfaces. Durable and versatile, this tile is ideal for kitchens, bathrooms, feature walls, and commercial spaces, offering both lasting performance and timeless style for homeowners, designers, and contractors seeking a balance of luxury and functionality.

$16.99 / Piece

Item Code: MM129-24115 Category Mosaics

720 Pieces in stock

Est. Coverage: 0.95 sq. ft. per piece | 4.75 sq. ft. per box | 342 sq. ft. per crate | Request Info

Note on Samples:
Sample pieces are small cut sizes, approximately 3" x 3" to 8" x 8", and intended for color and finish reference only.
If you need a full-size sample, please contact us.

Request Custom Pricing for Large Orders

Planning a large project? Orders over 500 sq. ft., full crates, or commercial applications may qualify for exclusive volume pricing. Reach out today and let us provide a custom quote tailored to your needs.

Request Volume Quote

Volume pricing available for qualified bulk orders.
We offer custom sizes, finishes, and crate-based shipments.

Dolomite White Strip Linear Polished Marble Mosaic Tile – Sleek Modern Elegance

The Dolomite White Strip Linear Polished Marble Mosaic Tile brings contemporary sophistication to any interior. Crafted from premium Dolomite marble, it features a bright white base accented with subtle gray veining. The polished finish enhances natural stone details while reflecting light to create a sense of depth and elegance.

Its strip linear layout produces clean, structured lines, making it perfect for modern kitchens, bathrooms, accent walls, and decorative panels. Whether installed horizontally or vertically, this versatile design adds movement and visual interest to any surface.

Durable and long-lasting, this tile combines natural beauty with practical strength, ensuring that both residential and commercial projects benefit from timeless style and performance.

Key Features:

Premium Dolomite marble with soft gray veining
Polished finish for a sleek, reflective surface
Strip linear design ideal for contemporary interiors
Durable natural stone for long-lasting use
Flexible for horizontal or vertical installation

Applications:

Kitchen backsplashes with modern appeal
Bathroom and shower walls
Accent strips or decorative wall panels
Commercial spaces needing style and durability

Weight	4 lbs
Dimensions	12 × 12 × 0.40 in
Color	White
Finish	Polished Finish
Thickness	3/8
Size (inches)	11.40 x 12.00
Collection	Dolomite Collection
Design	Strip Linear
Material	Marble
Usage Area	Backsplash, Commercial Interior Walls, Outdoor Floors, Outdoor Walls, Residential Interior Walls, Shower Floors, Shower Walls

Installation Guide – Dolomite Strip Linear Polished Marble Mosaic Tile

Material Overview

Material: Natural white Dolomite marble with a polished finish
Format: Linear strip mosaics, typically mesh-mounted (~12″x12″ sheets; some lots may be paper-faced)
Applications: Walls, backsplashes, shower surrounds, and light-traffic residential floors. Check slip requirements in wet areas.

Step 1: Surface Preparation

Ensure substrate is clean, dry, and flat (≤1/8″ in 10′). Patch or skim-coat high/low spots.
Approved substrates: cement backer board, cured concrete, or ANSI-compliant mortar bed.
In wet areas, install ANSI A118.10 waterproofing per manufacturer instructions.

Step 2: Dry Layout & Planning

Blend sheets from multiple boxes to distribute natural shade and vein variations.
Snap level reference lines to keep linear strips perfectly aligned.
Stagger sheet seams and trim mesh edges so strips interlock and sheet grid disappears.
Plan perimeter and obstacle cuts to avoid narrow slivers and maintain continuous lines.

Step 3: Adhesive (White Thin-Set) Application

Use white, polymer-modified thin-set (ANSI A118.4/A118.15) rated for natural stone; avoid premixed mastics.
Trowel recommendation: 3/16″ V-notch or 1/4″x3/16″ V-notch.
Key in with flat side, comb in one direction, and lightly flatten ridges to prevent telegraphing.
Work in sections you can cover within 10–15 minutes. Always use white thin-set under light Dolomite to prevent shadowing/picture-framing.

Step 4: Setting the Sheets

Align sheets to reference lines; press with a rubber grout float or beating block for full contact and flat plane.
Use wedge spacers to maintain straight, uniform linear joints.
Back-butter strips if needed; lift and reset immediately if lippage occurs.
Clean squeeze-through thin-set from joints and faces promptly with a damp sponge.
For paper-faced sheets: place paper-side out, beat in, lightly dampen after initial grab (≈10–20 min), remove paper, then true up joints.

Step 5: Cutting & Detailing

Use a wet saw with continuous-rim diamond blade; tape cut lines to minimize chip-out.
For small trims, use mosaic nippers sparingly; smooth edges with a rubbing stone.
Finish exposed edges with stone trim, metal profiles, or coordinating moldings.

Step 6: Grouting (Polished Marble)

Allow thin-set to cure (≈24 hours).
Use unsanded grout for joints ≤1/8″ to protect the polished surface. For wider joints, select fine-aggregate, marble-safe grout and test first.
Consider a marble-safe grout release or pre-seal to reduce pigment uptake on white Dolomite.
Pack joints diagonally with a rubber float; clean with minimal water to prevent washout or shading.

Step 7: Sealing

After grout cures (≈72 hours), apply a penetrating, breathable sealer approved for marble and grout.
Reapply periodically (every 1–2 years) depending on exposure and use.

Maintenance

Clean only with pH-neutral, non-abrasive stone cleaners; avoid acids, vinegar, bleach, or abrasive pads.
In showers, wipe or squeegee dry to minimize mineral deposits; use marble-safe descalers if necessary.

Movement Joints

Provide soft joints per TCNA EJ171 at perimeters and changes of plane.
Use 100% stone-safe silicone at inside corners and where tile meets dissimilar materials.

Important Notes & Disclaimer

Natural Dolomite varies in tone and veining; dry-lay and blend sheets before installation.
Expect slight size and thickness tolerances common to mosaics.
Always use white thin-set under light marble to prevent shadowing.
Stonemarket USA is not responsible for substrate issues or improper installation. Professional installation is recommended.