Crema Bella – French Pattern Sandblasted Marble Paver delivers a refined, minimalist aesthetic with its smooth sandblasted surface. Featuring soft beige and creamy white tones, this natural marble is perfect for contemporary outdoor spaces that demand both elegance and slip-resistant functionality.
Designed in a classic French Pattern layout, each set combines multiple tile sizes that interlock effortlessly, creating a dynamic, bespoke look for patios, pool decks, and other hardscape projects.
French Pattern Set Includes:
(2) pieces – 16″ x 16″
(1) piece – 16″ x 24″
(1) piece – 8″ x 16″
(2) pieces – 8″ x 8″
Installation Guide – Crema Bella French Pattern Sandblasted Marble Pavers
Tools & Materials Needed
Materials: crushed stone or gravel base, leveling sand or flexible thin-set mortar, joint filler (polymeric sand, fine sand, or grout), penetrating stone sealer, clean water.
Tools: tape measure, shovel, plate compactor, long level, rubber mallet, screed board, wet saw with diamond blade, grout float, spacers, broom, protective gear (gloves, goggles).
Step 1 — Base Preparation: Stable & Level Foundation
Excavate the area to accommodate paver thickness plus base layers.
Compact the soil thoroughly.
Spread and compact 4–6″ (100–150 mm) of crushed stone or gravel. For vehicle traffic, increase to 8–12″ (200–300 mm).
Ensure proper drainage with a slope of ~1/4″ per foot (2%).
Apply a 1″ (25 mm) layer of leveling sand or 3/4–1″ (20–30 mm) mortar and screed smooth.
Step 2 — Dry Layout: Plan the French Pattern
Dry-lay the pavers to preview the French Pattern and ensure even color distribution.
Mix pavers from multiple crates to achieve a natural, balanced appearance.
Mark centerlines or reference points for alignment and symmetry.
Plan edge cuts and corner placements before permanent installation.
Step 3 — Setting the Pavers: Sand-Set or Mortar-Set
Sand-Set Method:
Place pavers on the prepared sand bed.
Lightly tap each paver with a rubber mallet to set it.
Check level using a long straightedge or level.
Install edge restraints to maintain layout stability.
Mortar-Set Method:
Spread flexible thin-set mortar on the base.
Back-butter each paver for full adhesion.
Set pavers, tap lightly, and ensure level alignment.
Allow mortar to cure as per manufacturer’s instructions.
Step 4 — Joint Spacing: Natural & Functional
Step 5 — Filling Joints
Sand-Set: Sweep polymeric or fine sand into joints.
Mortar-Set: Use non-sanded or flexible grout appropriate for natural marble.
Remove excess material before it hardens.
Test filler on a small area to prevent discoloration.
Step 6 — Sealing: Protection & Enhancement
Once joints are fully cured, apply a penetrating stone sealer to protect the marble and enhance color.
Test sealer on a small area first.
Reapply every 1–3 years depending on traffic and exposure.
Avoid surface film sealers that may alter texture or slip-resistance.
Step 7 — Initial Cleaning & Curing
Avoid heavy traffic until mortar or filler is fully cured (24–72 hours).
Sweep and rinse gently to remove dust and debris.
Use only pH-neutral stone cleaners; avoid acidic or abrasive products.
Maintenance Tips
Sweep or rinse regularly to prevent dirt buildup.
Clean spills immediately to avoid staining.
Avoid harsh chemicals or salt-based deicers.
Reseal periodically to maintain protection and aesthetic.
⚠️ Important Note: Crema Bella marble is natural stone; variations in color, veining, and texture are normal. Always dry-lay and inspect pavers before final installation to ensure a harmonious visual flow.
