2″ Honeycomb Beige Honed Limestone Mosaic Tile – Natural Geometric Elegance
Enhance your interiors with the 2″ Honeycomb Beige Honed Limestone Mosaic Tile. Crafted from natural limestone, this mosaic features a classic honeycomb pattern and a honed matte finish that adds soft texture and understated sophistication. Its warm beige tones complement both modern and rustic spaces, making it ideal for creating elegant backsplashes, bathroom walls, or accent areas.
The mesh-mounted sheets ensure precise placement and smooth installation. With authentic stone texture and subtle tonal variations, this tile adds a natural, balanced aesthetic to any design.
Key Features:
Material: Natural limestone
Color: Warm beige with organic texture
Shape: 2″ hexagon chips
Finish: Honed – matte, non-reflective surface
Sheet Size: 10.4″ x 12″ (26.5 x 30.5 cm)
Installation: Mesh-mounted for easy placement
Use: Bathroom walls, vanities, kitchen backsplashes, accent areas
Why Choose This Tile?
The honed limestone offers authentic texture and natural tonal variation that ceramic alternatives can’t match. Its geometric honeycomb layout works beautifully with both curved and linear designs, reducing glare while enhancing warmth and visual balance.
Packaging & Coverage:
Sold per box – 5 mesh-mounted sheets
Coverage: Approx. 4.35 sq.ft. per box
Net weight: Approx. 25.1 lbs
Carefully packaged for safe delivery and storage
2″ Honeycomb Beige Honed Limestone Mosaic Tile – Installation Guide
Step 1: Surface Preparation – Create a Solid Base
Clean and dry the surface, removing dust, oils, and debris.
Ensure the substrate is level, stable, and free of cracks.
Apply a waterproofing membrane in wet areas like showers.
Remove trims, outlet covers, or other obstacles.
Use a leveling compound if necessary to smooth uneven areas.
Step 2: Layout Planning – Achieve Symmetry
Locate the center of the wall or surface for balanced placement.
Dry-lay sheets to check consistency in color and pattern flow.
Adjust placement to avoid awkward cuts at edges.
Use 1.5–3 mm spacers for uniform grout spacing.
Step 3: Adhesive Application – Use a Reliable Thin-Set
Recommended Brands: Mapei, Laticrete, Ardex
Instructions:
Mix small batches usable within 30 minutes.
Apply with the flat side of a 1/4″ notched trowel.
Comb mortar at a 45° angle for full coverage.
Back-butter sheets for better adhesion.
Work in sections to prevent early drying.
Step 4: Cutting & Fitting – Precision Placement
Use a wet saw with a fine diamond blade.
Mark cuts accurately with a pencil.
Smooth cut edges with a stone file or rubbing block.
Dry-fit tiles before securing them permanently.
Step 5: Setting Tiles – Maintain Pattern Consistency
Begin at the center and work outward.
Press mesh-backed sheets firmly into thin-set.
Use spacers to ensure even spacing.
Level tiles with a rubber mallet as needed.
Remove excess thin-set with a damp sponge.
Allow 24 hours for adhesive to cure before grouting.
Step 6: Grouting & Sealing – Complete the Installation
Use non-sanded grout to protect the honed limestone surface.
Apply diagonally with a rubber float.
Wipe away excess grout immediately and buff haze after 15–20 minutes.
Allow grout to cure for 72 hours.
Seal with a penetrating, stone-safe sealer for protection.
Maintenance Tips – Keep Your Tile Looking Fresh
Clean only with pH-neutral, stone-safe cleaners.
Avoid acidic or abrasive products.
Reseal as needed depending on exposure and usage.
Use felt pads under nearby furniture to prevent scratches.
Shipping & Packaging
Important Note:
Stonemarket USA is not responsible for improper installation. Professional installation with premium adhesives and sealers is strongly recommended to ensure long-lasting performance and a flawless finish.
